Welcome to the Lawless Drives showcase.
Please browse for your needs, then call or e-mail with any questions or to place your order. Check out "About Us" for more information about our company. We are your main source for outboard drives, parts, flexshafts, and more! Thank you for visiting.
See the Gallery for this month's featured boats Thanks Eric and Ron!
When the time comes to move up to a Big Gas Boat (say that three times, fast), the ORIGINAL purpose-built gas outboard drive is the Lawless "Cutthroat" G-Drive. Machined from rugged "billet" 6061-T6 aluminum plate, like all of our drives, and built to handle the biggest and baddest GAS outboard motors. Complete with everything needed to bolt on to a boat and go, except the motor, pipe, prop, and steering linkage. Add our Heavy Duty, Ball-joint, adjustable steering rod kit and you will have the best combination available. Other accessories also available.
Includes the drive, a steel driver for your motor, four flexshafts, the propshaft, 3-piece transom mount, motor mount, water pickups, and steering arm. It also has reinforcing plates for the inside and outside of the transom, plus all mounting screws and nuts, with spares. The mount plate is designed for standard Zenoah motors and clones, or you can request a special mount plate for the AWESOME QuickDraw engine. Coming soon, our own electric motor mount plates for popular brushless motors and an optional Anti-Vibration motor mount. Available now, our EXTREME cavitation plate. Check out the picture. It looks scary, but is still safe. Other available accessories include the heavy duty steering rod set, a water deflector for the carb, throttle linkage kit, and coil relocating bracket.
We cannot tell you about our drive without mentioning the SERVOCITY gearbox for steering your Big Gas boat. Surprisingly, big outboard tunnels turn extremely easily, but are very hard to straighten back out. They will turn with such force that ordinary servo gears can be stripped out on your first turn. Then whattaya gonna do? You need lots of torque, as much as 1000 oz-in , or more. Sounds crazy, we know. That amount of torque is very difficult to obtain from servos alone, even multiple servos. In addition, ordinary servos try to turn the boat too quickly. The BEST choice is a servo gearbox from SERVOCITY. Please take the time to read the notes in the Extra Info section about them, and find out how to get a discount when you order yours. Don't put your boat in the water unless you have enough servo torque to control it effectively. Your boat, or someone else's boat could be damaged beyond repair.